Tag: FreeBSD rss

Posts

23 November 2016 / / sa / sitenews / unix
So, I decided it was time to go TLS (aka https) with all my websites. This is something I have wanted to do for a while, but I held off due to the way I had to get my laptop on the wireless at the previous job. Now that I have left, there was no need for that, so away I go! On the job front, this was an odd week to start with almost everybody on my new team being out due to the holiday.
31 July 2016 / / sa / personal / unix
Wow…summer is almost over. Three more weeks until school starts again. Need to spend more time putting pictures up from some of the trips we have done. I think there is time to squeeze another visit to the beach before school starts up, but we will see. One of the projects I have been working on is taking over web hosting for an organization I volunteer with. The old hosting was with a former member at his hosting company, but he is retiring as of the end of July, so I stepped up to host it.
16 June 2016 / / unix
So, in the last couple of weeks, I have had the following issues: The CMOS battery dies on my file-server (a FreeNAS box), taking it, and the zpools down with it. I fought over a long weekend to recover the data, and in the end, got it mounted read-only, and copied it off. New hardware, and new zpools, and we seem to be going again. Recovering services is taking a bit of time.
29 February 2016 / / sitenews / unix / personal
Happy Leap Day! Another month has gone by, and things have been busy. In addition to all the normal crazy that is life with kids, I have been elected to the kids pre-school board of directors. Now, the oldest two no longer go there, but the youngest will be there another year, any my term is three years, so there will be a bit of time when I will not have a kid there.
06 February 2015 / / unix / sa
And, again, I hit something which is causing massive disk performance issues. That, and suspend/resume does not work on either laptop. I would try to debug the issues, but that means learning a whole new set of tools, and I will not have time for a while. Next week, I am in week long meetings which will run late every day, and then I have to finish writing and present a training class the last week of the month.
30 January 2015 / / unix / sa
As the month draws to a close, I am further into the switch. I have rebuilt my main laptop to PCBSD. I am still setting a few things up, but it seems to be going well. Two things I need to fix: Skype: While there is not a native client, there are lots of folks who report success with the Linux client. I will need to do some research. Nikola: The software I use for my blogs.
14 January 2015 / / sa
Today is day 14 (pushing day 15 at this hour), and things are looking very good. Today, I got word from the PCBSD Project that a patch which I submitted to fix the issue with the WiFi NIC. Well, I got notice today that PCBSD Bug #7330 has been resolved, and I tested on the R810. It works! Now, I just need to get a few things configured here first, like snapshots, backups, and porting my SDCARD reading scripts over to FreeBSD, and I should be good.
05 August 2014 / / unix / sa
So, I have upgraded my servers at the house to FreeBSD, and have set up the basic functions needed on them. So, now, I am down to only my main laptop running Linux. Oh, and the work machine which runs Windows 8.1. So far, not much different than running Arch for the server. But, the magic will be when I start working with jails...
24 July 2014 / / unix / sa
I just noticed I have not updated this in a few weeks. Sorry about that. I have my R810 running PCBSD 10.0.2, and I just patched and configured WiFi on it. I need to figure out how to submit a patch to see if I can get the Centrino supported in the main-line kernel so I do not have to compile a custom kernel just for that. I almost have this working where I can switch to it full time.
30 June 2014 / / unix / sa
So, I had a bit of time over the weekend, and spent it doing a bit of hacking around. I had re-installed PC-BSD on my HP EliteBook R810. I used 10.0.2, and everything but the wireless looked good. I decided to try to get the wireless working with the internal WNIC. Previously, I used an external dongle to get WiFi working, but it was a pain to remember to pull it out, so I decided to try again.
22 April 2014 / / unix / sa
Well, Something broke on the main computer. The speed when trying to run a few terminal apps, firefox, and thunderbird at the same time was appalling. I never had that sort of performance issues under ArchLinix on the same kit. I would love to take the time to debug it, but I am almost four weeks behind in dealing with my photos, including those from my trip to England, and I am getting ready to do run some training courses for work which will suck up all my free time.
17 April 2014 / / unix / sa
Today, I got my new laptop dragon up on wireless with a little Edimax EW-7811Un 150 Mbps Wireless 11n Nano Size USB Adapter. Now, setup begins in ernest. I have disabled the on-board wireless NIC in the BIOS, and started to set up shop on it. Next major task. Configure X. :) d
15 April 2014 / / unix / sa
Sorry about the lack of updates over the last two weeks, but my job sent me out of country for two weeks, and I had no time to work on this project. Once I unbury myself, I will return to this with a vengence. I am planning on upgrading my two servers to FreeBSD10 from Linux. One will involve a major disk reworking as one of the disks is about dead.
29 March 2014 / / unix / sa
Busy day with other things than play computers, but I found a little time. I have FreeBSD 10-STABLE loaded with the custom WiFi hack on my Elitebook Revolve 810 . I would have to let it try to boot off the USB stick. After multiple tries, it would finally run the installer. I tried ZFS a few times, but if I did not select MBR format for the partition table, then it would not boot (no OS error).
27 March 2014 / / unix / sa
Half-way point. Much progress made in the world of a bootable USB stick to get my new-fangled WiFi chip working. I was able to make a new image, wrote it to a new USB stick, booted it, and was able to successfully scan for my Access Points! W00t! Tomorrow, I will take the second laptop (HP EliteBook Revolve 810), and load it with 10-Release (slightly patched). I do not expect everything to work (it has a touch screen), but enough should work that I can start using it for the daily driver.
22 March 2014 / / sa / unix
Ah, life with kids…not enough spare time with soccer and volleyball practices and games. Things are going well. Found a few more small utilities that I use under Linux and added them via pkgng, and all is good. Next up: system debugging. The system will slow down at random points, so I need to go find a good performance debug guide. The only thing changed was I imported my music library (~60G), but my drive is still plenty empty (~37% used), so I do not think it is ZFS, but I am not sure.
19 March 2014 / / sa / unix
Again, work is dragging, so not much to update. I have install btsync and I am now syncing home dirs between the laptop, desktop, and the FreeNAS. My attempt to build a custom kernel to deal with the new WiFi was mixed. I was able to build the kernel and world just fine and it made a USB image for me. But, it would not boot...I do need to figure out how to debug this.
18 March 2014 / / unix / sa
AKA Fight with Thunderbird and Lightning. I broke down and installed a PBI for now. I could not get Lightning, the calendaring AddOn for Thunderbird to work using the native FreeBSD pkg or the linux-thunderbird one. The linux-thunderbird package actually refused to start for me. I need to go figure out how to generate a PR. The other thing I am playing with is building a memstick image after patching the kernel using this post in the FreeBSD Forums.
16 March 2014 / / unix / sa
Sorry…busy time at work and with the family. Small updates: I have the external VGA dongle working. No config needed, just plug it in and it works. I really need to fix the WiFi so I can stop using the USB dongle on it. Also, I have updated mutt to 1.5.23, and that upgrade went smoothly. Since I am not using the default build, it was a matter of portsnap fetch && portsnap update && cd /usr/ports/mail/mutt && pkg remove mutt && make install clean and all is good!
14 March 2014 / / unix / sa
No major work on the laptop today because I set up a FreeNAS box. I was able to get 4 x 3T drives, and set it up. Pretty easy. I am now busy moving my media over to it.
13 March 2014 / / unix / sa
Just a quick update. Yesterday, I got abook working. Kind of a hack, though. I used gcc to compile it, vs. clang. I will have to revisit this and offer up some patches to the abook project. I have also been playing with x11/xpra which bills itself as 'screen for X11'. That, combined with sshuttle , lets me get in from work and do some work during lunch. It may also give me a tempory way to use AfterShotPro until I get the whole Linux compatability layer thing figured out.
12 March 2014 / / sa / unix
So, a long time ago, I had a box which was running FreeBSD 4, running on a Pentium. This housed my public server, website, and mail server. After I while, I had to rebuild it, and went back to Linux. 14 years later, I have decided to get back into FreeBSD, now at FreeBSD 10. I have it running headless on two boxes, and I have decided to take the ‘30 Day Challenge’.
08 January 2014 / / sa / unix
Well, as I [mentioned before <tale-of-install>]{role="doc”}, I was trying to install OpenBSD. Well, my main workstation died, so I have to re-purposed the OpenBSD box as my workstation running ArchLinux. I am hunting for a suitable replacement. Oh, and Happy New Year!
21 November 2013 / / sa / unix
So, I am starting a new personal project at the house, and I need a new server. As I was wanting to learn more about the BSD, I started looking around at things like FreeBSD, NetBSD, or OpenBSD. Since there was a security part, I started with OpenBSD. One of the things I noticed quickly while doing my research is that while there is a lot of documentation, they do not really seem to care about making it easy for new folks to join the project, nor are the trying to support new-fangled hardware, like bootable USB drives.